高速船减阻减摇艏艉鳍的试验研究

采用试验研究的办法 ,探讨了减阻减摇艏艉水鳍在傅氏数Fr =0 .5～ 0 .9的范围内圆舭快艇上应用的规律性问题 ,通过对某型舰艇模型的试验研究表明 :Fr =0 .5～ 0 .9的圆舭快艇模型总阻力可减小 5 %～15 % ,且在波浪中的适航性有明显的改善 .     

火箭弹防静电短路卡抗静电性能实验研究

通过实验研究了火箭弹系统在安装防静电短路卡前后静态电阻的变化 ,提出了利用脉冲电流发生器测定安装防静电短路卡后系统动态电阻的方法。研究表明 ,安装防静电短路卡后 ,系统动态电阻很小 (小于30mΩ) ,火箭弹抗静电性能明显提高     

Effects of material of metallic frame on the penetration resistances of ceramic-metal hybrid structures

The effects of metallic material on the penetration resistances of ceramic-metal hybrid structures against vertical long-rod tungsten projectiles were studied by artillery-launched experiments and numerical simulation. Hybrid structures with rectangular cores in transverse orthogonal arrangement and slide-fitting ceramic inserts of zirconia toughened alumina prisms were fabricated with titanium alloy TC4 (Ti6Al4V), AISI 4340 steel and 7075 aluminum alloy panels, respectively. The results showed that the hybrid structure of Ti6Al4V exhibited the highest penetration resistance, followed by that of 7075 aluminum alloy with the same area density. The penetration resistance of the hybrid structure of AISI 4340 steel was the lowest. The underlying mechanisms showed that the metallic material of a ceramic-metal hybrid structure can directly affect its energy absorption from the impact projectile, which further affects its penetration resistance. Different metallic frames exhibited different failure characteristics, resulting in different constraint conditions or support conditions for ceramic prisms. The high penetration resistance of the Ti6Al4V hybrid structure was due to its stronger back support to ceramic prisms as compared with that of AISI 4340 steel hybrid structure, and better constraint condition for ceramic prisms by metallic webs as compared with that of 7075 aluminum alloy hybrid structure. The results of mass efficiency and thickness efficiency showed that the Ti6Al4V hybrid structure has advantages in reducing both the thickness and the mass of protective structure. In addition, because the ceramic-metal hybrid structures in the present work were heterogeneous, impact position has slight influence on their penetration resistances.     

活性屏离子渗硫层在40#油润滑条件下的摩擦学性能

应用活性屏离子渗硫技术,在CrMoCu合金铸铁表面制备出以FeS相为主的渗硫层。实验表明,在40#油润滑条件下,活性屏离子渗硫表面的摩擦因数比未渗表面大约降低了13%,与渗硫表面相近;体积磨损量比未渗表面减少了30%左右,与渗硫表面相似。由于活性屏离子渗硫层的主要成分为密排六方晶体结构的FeS,且其结构疏松多孔易于储存润滑油,因此具有良好的减摩、耐磨性能。     

舰船腐蚀电场建模及补偿最优解验证

基于等效偶极子法,从补偿偶极子长度、角度、大小三方面给出了任意角度的补偿偶极子场解析式,再利用电荷矢量叠加原理,建立了"腐蚀偶极子+补偿偶极子"电场模型。仿真以单轴桨船为例,先验证"腐蚀偶极子+补偿偶极子"电场模型的正确性,再进行补偿偶极子对舰船电场的影响验证,从而得出补偿最优解。模拟实验结果表明,补偿阳极在工程允许条件下距离补偿系统接船端最远处,且补偿系统平行于水平面和船体时补偿效果最优;在补偿最优条件下,理论上是可以抵消原舰船腐蚀电场的。     

电偶腐蚀下非稳态扩散瞬时静电场分析

为分析在浓差极化条件下非稳态过程中的静电场分布情况，在斐克第二定律的基础上利用拉普拉斯变换求解电极表面氧浓度随时间的变化。通过法拉第定律分析受氧浓度控制下的电偶腐蚀电流密度，在此基础上利用电流元模型求解电解质溶液中任意位置处产生的瞬时电位及静电场强度，并通过实验验证结果的正确性。结果表明：浓差极化下的非稳态扩散传质产生的静电场及电位会随着时间的增加而逐渐减小，并最终达到稳态，且电流密度会随着氧的浓度减小而减小。     

Analysis of sliding electric contact characteristics in augmented railgun based on the combination of contact resistance and sliding friction coefficient

The contact resistance between the armature and rails is an important indicator of the contact characteristics in electromagnetic launches. As the contact resistance depends not only on the contact state but also on the contact stress and temperature, there are some limitations in analyzing the contact characteristics using only the contact resistance. In this paper, the contact characteristics of the augmented railgun are analyzed by the combination of contact resistance and sliding friction coefficient. Firstly, the theoretical calculation model of the contact resistance and friction coefficient of the augmented electromagnetic railgun is established. Then the contact resistance and friction coefficient are calculated by the measured values of the muzzle voltage, rail current and armature displacement. Finally, the contact characteristics are analyzed according to the features of the waveforms of the contact resistance and the friction coefficient, and the analysis conclusions are verified by experimental rail images. The results showed that: the aluminum melt film gradually formed on the contact surface reduces the contact resistance and the friction coefficient; the wear and erosion of the armature cause deterioration of the contact state; after the transition, the reliability of the sliding contact between the armature and rails decreases, resulting in an increase in contact resistance.     

EU security sector reform in Bosnia and Herzegovina: Reform or resist?

ABSTRACT

Attempts to explain the failure to reform the security sectors in post-conflict countries have often resorted to two sets of explanatory factors: international and local factors. This article seeks to move from that unhelpful dichotomy to an explanation linking both factors. Drawing on a Foucauldian approach and the concept of “counter-conduct,” it examines the rationality and practices of European Union (EU) governmentality and how governing technologies are resisted and reversed by local elites involved in security sector reform (SSR). Instead of understanding power and resistance as binary opposites, this article argues that counter-conduct can be conceived as implicated in the very relations of power that it seeks to resist. To tease out these relations, the article analyzes the EU's efforts in SSR in Bosnia and Herzegovina, where it identifies four forms of counter-conduct: upholding European standards, using the local ownership trap, simulating reforms, and lowering the bar.     

异步电机定子电阻的观测

介绍了一种基于神经网络技术的感应电机定子电阻观测方法;讨论了定子电阻样本规划,并设计训练形成了定子电阻神经网络观测器.试验表明,该技术方法能有效地实施定子绕组电阻在线观测.     

防空兵群射击指挥方式及其优化问题

从防空兵作战指挥的实际需求出发,利用概率论和防空作战运筹理论,描述了集中、分散、混合和平行等射击指挥方式的概念、特点及其相互关系,论述了射击指挥方式定量分析的基本方法、主要依据和指标,建立了基于群抗击效率的评估模型,在对多种射击指挥方式进行定量比较的基础上,揭示了射击指挥中具有普遍意义的、潜在的实用规则.